Temp Flying Probe Test Operator (2:30pm-11:00pm)

Job Description

About the Role

Coast Personnel is seeking a Temp Flying Probe Test Operator (2:30pm-11:00pm) in San Jose, CA, for a temporary opportunity in the light industrial sector. This position focuses on testing printed circuit boards (PCBs), identifying defects, and separating acceptable boards from material requiring rework or scrap disposition. It is suited to an experienced PCB test operator who can follow production instructions, handle detailed inspection work, and maintain accuracy while operating automatic and semi-automatic equipment.

As a Temp Flying Probe Test Operator (2:30pm-11:00pm) with Coast Personnel in San Jose, California, you will work with Takaya machines and ATG flying probe equipment to verify inner PCBs against established requirements. The assignment also includes careful rework of excess copper shorts using an X-Acto knife under magnification. The scheduled shift is 2:30 p.m. to 11:00 p.m., with availability for overtime and weekend work required as production needs arise.

A Day in the Life

Your shift will center on reviewing process sheets or supervisor instructions, setting up test equipment, and running PCB testing tasks. As boards move through testing, you will evaluate results against predetermined tolerances and distinguish acceptable material from defective boards. Some issues may require precision rework under a dynascope or magnifying glass. Throughout the shift, clear communication about test results, questionable conditions, and rework needs helps keep production organized without sacrificing inspection quality.

Key Responsibilities

  • Set up and operate automatic or semi-automatic machines used for assigned PCB production and testing activities.
  • Test and verify inner PCBs using Takaya machines and ATG flying probe equipment according to established instructions.
  • Use process sheets and written or verbal supervisor direction to complete production tasks in the required sequence.
  • Check machine operations and board inspection results against predetermined tolerances rather than relying on appearance alone.
  • Identify defects and separate good boards from those designated for rework or scrap to prevent material mix-ups.
  • Remove excess copper shorts with an X-Acto knife while using a dynascope or magnifying glass for close visual control.
  • Communicate unclear instructions, questionable test results, and observed defects so the appropriate next steps can be determined.
  • Handle boards and precision tools carefully, following applicable workstation procedures during testing, inspection, and rework.
  • Support production needs by working the assigned afternoon-to-evening schedule and overtime or weekends when needed.

Required Qualifications

  • Two to four years of hands-on PCB test experience, with an understanding of board testing and defect identification.
  • Ability to communicate in English verbally and in writing, including understanding instructions and explaining production concerns.
  • Availability to work the 2:30 p.m. to 11:00 p.m. shift associated with this temporary assignment.
  • Flexibility to work overtime and weekends as required by production demands.
  • Ability to follow process sheets, written directions, and verbal guidance while checking work against specified tolerances.
  • Attention to detail and the fine manual control needed for inspection and copper-short rework under magnification.

Preferred Skills

  • Previous operation of Takaya PCB test machines or ATG flying probe systems in a production environment.
  • Familiarity with inspecting inner PCBs and recognizing conditions that distinguish acceptable boards from defective material.
  • Experience performing controlled copper-short removal using a precision knife and magnification equipment.
  • A consistent approach to sorting material and maintaining clear separation between good, rework, and scrap boards.
  • Comfort balancing repetitive production tasks with the concentration required for close visual inspection.

Pay and Benefits

Compensation in US dollars has not been specified for this temporary PCB testing position. The available description also does not identify a benefits package. Applicants should review the assignment’s compensation and eligibility details during the application process rather than assume a particular hourly rate or coverage level.

  • Pay: USD hourly rate or salary not provided.
  • Employment type: Temporary assignment in light industrial production.
  • Scheduled hours: 2:30 p.m. to 11:00 p.m.
  • Additional availability: Overtime and weekends as needed.
  • Benefits: Availability and eligibility are not specified in the supplied description.

Career Growth

This assignment offers an opportunity to deepen practical skills in flying probe testing, PCB defect recognition, and precision rework. Those capabilities can support future applications for experienced test operator, PCB inspection, manufacturing technician, or quality-focused production roles. Working accurately from process requirements also builds transferable manufacturing discipline. Because this is a temporary position, a permanent placement, promotion, or specific assignment duration should not be assumed.

Working in San Jose, CA

San Jose, CA, is part of Silicon Valley, where electronics, technology, and related manufacturing activities contribute to demand for production and testing skills. For candidates seeking PCB test operator jobs in San Jose, California, this role offers a specialized manufacturing focus. When planning a commute, consider both afternoon travel and transportation home after 11:00 p.m. Traffic and late-evening transit availability vary by route, so the worksite location will be important when assessing daily travel.

Why Join Coast Personnel

This Coast Personnel listing provides a clearly defined opportunity for someone who already understands PCB testing and prefers hands-on technical production work. The combination of machine operation, inspection, material sorting, and fine rework makes accuracy central to the assignment. If your strengths include following detailed instructions, identifying defects, and staying focused during close-up work, this temporary evening-shift position is worth considering.

Frequently Asked Questions

What experience is needed for this flying probe test operator job?

The stated requirement is two to four years of PCB test experience. Familiarity with Takaya machines, ATG flying probe equipment, and inspection under magnification is especially relevant to the duties.

What hours will I work?

The listed shift runs from 2:30 p.m. to 11:00 p.m. Candidates must also be available for overtime and weekend work as needed; a fixed weekly overtime commitment is not specified.

Is this a permanent position?

No. The opening is listed as temporary. The assignment length and any possibility of conversion to permanent employment are not provided.

Does the job include PCB repair work?

It includes targeted rework: removing excess copper shorts with an X-Acto knife under a dynascope or magnifying glass. Broader repair duties, such as component replacement or soldering, are not listed.

How to Apply

Apply through this listing for the Temp Flying Probe Test Operator (2:30pm-11:00pm) position with Coast Personnel in San Jose, CA. Highlight your PCB testing experience, relevant equipment knowledge, and availability for the scheduled shift and additional hours.

Apply for Temp Flying Probe Test Operator (2:30pm-11:00pm)

Submit your application for this position at Coast Personnel

When you apply, we automatically create a free candidate account for your email address so every application is saved in one place. Choose a password (8 characters or more) to sign in straight away — or set one later from the link in your confirmation email. You can delete your account at any time from your account page.

PDF, DOC, or DOCX (max 5MB)

Ready to Apply?

Submit your application for this position